2866NTX/SM2 Repair Tips
Search: 2866NTX/SM2
Results 5
Results 5
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Bush | 2866NTX/SM2 | Intermittently the stereo symbol would appear on screen, sometimes it would change to dual II and back again, while this was happening the sound would crackle and sometimes disappeared all together | The problem was cured by re-soldering over the whole NICAM panel. Note: The Bush 2866NTX without the SM2 in the model is a different | ||
Bush | 2866NTX/SM2 | Won't store or loses chan store | This was cured by replacing memory 24C08 | ||
Bush | 2866NTX/SM2 | To access tuning mode | press and hold [MENU] button for at least 5 sec. Then press and hold the white button for at least 5 sec to auto tune all the channels. Then use the green button to re-arrange the stored channels. | ||
Bush | 2866NTX/SM2 | Line tearing when heated | C597 (22nF 400V) completely open circuit. | ||
Bush | 2866NTX/SM2 | Blank white raster - sound ok | Jungle chip TDA8363AN3 |